SUPERVISORY ARCHITECT/ENGINEER
As a SUPERVISORY ARCHITECT/ENGINEER, GS-0810-13, you will be located in the ANG Base Engineering Division. Serves as the ANG Base Architect/Engineer and, as such, plans, directs, supervises and develops all architect/engineering and personnel management activities in the broad areas outlined below regardless of source of funds or methods of accomplishment. Manages all Air Force real property, utilities, and custodial, sanitation, and entomological services. Provides for and manages the maintenance and repair of plant facilities and equipment; fire protection and inspection; recovery from damage to facilities from any cause including decontamination from a chemical, biological, and nuclear incident or direct terrorist and conventional attacks; natural disaster preparedness actions:
reporting through the Air Force Operational Reporting System (AIM 55-11) installation damage, and the assistance and funding required to recover the ANG Base. An additional purpose of the position is to provide supervision and management of engineering, services, disaster preparedness and readiness (weapons of mass destruction, chemical, biological and nuclear defense), explosive ordnance disposal (EOD) (where applicable) and crash-fire-rescue (CFR) for the ANG installation including tenant organizations. Supervises, through subordinate supervisors, a sizable work force of professional engineers, architects and highly skilled supervisory and non-supervisory personnel having divergent occupational specialties and representing a wide range of grades. This position requires military membership. It is designated for National Guard officer incumbency only. The incumbent provides supervision, subordinate guidance and team leadership to Non-Dual Status and Dual Status employees. Incumbent performs long term planning and organizational development necessary to accomplish architecture and engineering functions for programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conducive to teaming among service providers and customers to meet state Air National Guard requirements. Other duties as assigned. Details of the additional duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp This is an indefinite position, tenure 3, with a time limit determined by the needs of the agency. Any permanent military technician who is selected for this position will become tenure 3. The selectee will receive the same benefits and entitlements as the tenure 1 employee, but will be considered tenure 3 for purposes of reduction in force. If a permanent resource becomes available, incumbent may be converted to a permanent appointment without competition. NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed on Application Manager. GENERAL
Experience:
Do you possess a degree in professional engineering? To be acceptable, the curriculum must:
(1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test-- Evidence of having succesfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) SPECIALIZED
Experience:
Must have at least 1 year of experience equivalent to at least the next lower grade. Experience which includes leading, directing and assigning work of personnel.
Estimated Salary: $20 to $28 per hour based on qualifications.
reporting through the Air Force Operational Reporting System (AIM 55-11) installation damage, and the assistance and funding required to recover the ANG Base. An additional purpose of the position is to provide supervision and management of engineering, services, disaster preparedness and readiness (weapons of mass destruction, chemical, biological and nuclear defense), explosive ordnance disposal (EOD) (where applicable) and crash-fire-rescue (CFR) for the ANG installation including tenant organizations. Supervises, through subordinate supervisors, a sizable work force of professional engineers, architects and highly skilled supervisory and non-supervisory personnel having divergent occupational specialties and representing a wide range of grades. This position requires military membership. It is designated for National Guard officer incumbency only. The incumbent provides supervision, subordinate guidance and team leadership to Non-Dual Status and Dual Status employees. Incumbent performs long term planning and organizational development necessary to accomplish architecture and engineering functions for programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conducive to teaming among service providers and customers to meet state Air National Guard requirements. Other duties as assigned. Details of the additional duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp This is an indefinite position, tenure 3, with a time limit determined by the needs of the agency. Any permanent military technician who is selected for this position will become tenure 3. The selectee will receive the same benefits and entitlements as the tenure 1 employee, but will be considered tenure 3 for purposes of reduction in force. If a permanent resource becomes available, incumbent may be converted to a permanent appointment without competition. NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed on Application Manager. GENERAL
Experience:
Do you possess a degree in professional engineering? To be acceptable, the curriculum must:
(1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test-- Evidence of having succesfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) SPECIALIZED
Experience:
Must have at least 1 year of experience equivalent to at least the next lower grade. Experience which includes leading, directing and assigning work of personnel.
- Department:
0810 Civil Engineering - Salary Range:
$91,231 to $118,603 per year
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
