AIRCRAFT MECHANIC LEADER
As a AIRCRAFT MECHANIC LEADER, WL-8852-10, you will established based on functional requirements derived from the NGB On Condition Maintenance (OCM) and sustainment maintenance, to include limited Depot Repair Programs. OCM and sustainment level repairs are cost effective programs to enhance the readiness, availability, and ability to extend Army aircraft life well into the 21st century. 1.On a regular and recurring basis, leads 5-7 aircraft mechanics, crew chiefs, and specialist personnel performing work on the aircraft production maintenance floor. 2. Monitors the work of assigned personnel, sets the pace, passes along assignments, and assures that materials, tools, equipment, and stock are available. Works along with aircraft mechanics and specialist personnel performing journeyman work as required. 3. Insures that assigned personnel are fully utilized and work is accomplished in accordance with established time frames and priorities. Checks work in progress and/or upon completion for compliance with the supervisor's instructions, appropriate technical orders, etc. Serves as a technical advisor by answering questions regarding appropriate procedures, policies, written instructions and other directives. Ensures that safety, housekeeping, security and other environmental rules are followed. 4. Advises the supervisor of overall work operations, status and progress of work, causes for delays, problems encountered, and individual performance (e.g., additional on-the-job training requirements for individual employees). As requested by the supervisor, provides functional planning for the inspection docks. On a daily basis, recommends adjustments in work schedules to provide optimum utilization of personnel in support of functional requirements. 5. Performs other duties as assigned. Details of the duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp This is an indefinite position, tenure 3, with a time limit determined by the needs of the agency. Any permanent military technician who is selected for this position will become tenure 3. The selectee will receive the same benefits and entitlements as the tenure 1 employee, but will be considered tenure 3 for purposes of reduction in force. If a permanent resource becomes available, incumbent may be converted to a permanent appointment without competition. NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). GENERAL
Experience:
Experience or training that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series. SPECIALIZED
Experience:
Must have 24 months of experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series. If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Multiple vacancies may be filled from this announcement. g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.
Estimated Salary: $20 to $28 per hour based on qualifications.
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp This is an indefinite position, tenure 3, with a time limit determined by the needs of the agency. Any permanent military technician who is selected for this position will become tenure 3. The selectee will receive the same benefits and entitlements as the tenure 1 employee, but will be considered tenure 3 for purposes of reduction in force. If a permanent resource becomes available, incumbent may be converted to a permanent appointment without competition. NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). GENERAL
Experience:
Experience or training that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series. SPECIALIZED
Experience:
Must have 24 months of experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series. If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Multiple vacancies may be filled from this announcement. g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.
- Department:
8852 Aircraft Mechanic - Salary Range:
$32.56 to $38.01 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
